OmniVision OV10633 CMOS 720p WDR USB Camera Module for Strobe-Lit Entry Panels
$1.00
Fit a 95 × 15 mm WDR USB board behind a narrow entry panel and time external fill lighting to camera exposure for visitors standing against bright daylight.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.

OmniVision OV10633 CMOS 720p WDR USB Camera Module for Strobe-Lit Entry Panels
$1.00Request a Call Back

OmniVision OV10633 CMOS 720p WDR USB Camera Module for Strobe-Lit Entry Panels
$1.00Ask a Question
Introduction
When a subject stands in shade against a bright background, its outline may remain visible while important surface detail disappears. The OV10633 combines WDR capture with a timing output at the start of exposure, so an external lighting driver can add light when the camera is collecting the image. Its 95 × 15 mm board places that capability behind a narrow panel. USB carries the video to the host while the lighting controller uses the separate timing signal.
Applications in Real Devices
Video door-entry panels
A visitor leaning toward a recessed door panel can remain in frame but move inside the standard focus range.
Check facial detail at the nearest standing position, with sunlit pavement visible behind the visitor to test the WDR image.
Vending-machine user viewing
A bright display leaves little bezel space for a camera aimed at the customer. Position the 95 × 15 mm board along the display edge, then check that the window clears the H85° view when a user stands to one side.
Parking-entry interaction terminals
A driver may stop off-centre behind reflective glass, with the entrance canopy shading the vehicle. Check the H85° view across likely stopping positions and, for night use, test the external fill light through the vehicle window for glare.
Project Evaluation Guide
- Where will the visitor actually stand?
The standard lens focuses from 60 cm and covers H85°. If someone can lean within 40 cm of a flush door panel, their face may still fit in the frame while its details soften. Establish that nearest distance before fixing the lens position.
- Which device controls capture timing?
Choose this board when the camera may run on its own cadence and the external light must follow exposure. If a gate controller must start each capture when a vehicle reaches a mark, the project requires a verified trigger input.
- Can the bezel accommodate the installed assembly?
The 95 × 15 mm board suits a long strip beside a display. Use a section through the lens opening as well as a front view of the PCB. A narrow opening or deep setback can clip the H85° view even when all mounting holes fit.
How This Module Supports Device Requirements
Seeing the visitor and the approach together
At a shaded entrance, increasing exposure to reveal a face can wash out the bright approach behind it. WDR helps preserve information in both regions of the same 720p image. A visitor who receives too little light may still need fill lighting.
Lighting only when the camera needs it
Trigger Out provides a timing reference when exposure starts. A compatible, separately powered light driver can use that signal to pulse the lamp during capture, reducing unnecessary light-on time between images.
Video and lamp control follow separate paths
The host receives 1280 × 720 MJPEG at up to 30 fps over USB 2.0. The timing signal goes directly from the camera to the lighting controller, so the host application need not estimate exposure timing from the arrival of a USB frame.
Choosing This Model the Within HDR / WDR Camera Module Series
Model | Key Configuration | Selection Reason |
SF-C1013USB-9515-FF V1.0 | 720p30 MJPEG · H85° · 95 × 15 mm · strobe out | Choose this board if a separate driver must pulse the light when exposure starts. |
SF1A447 | 720p30 MJPG · UVC · manual focus · lens choices | Choose this square UVC board when lens selection and the customer’s standing distance drive the design. |
SF2A143 | 1080p30 MJPG · HDR/WDR · USB 2.0 UVC | Move to Full HD when the smallest entrance detail is under-sampled at 720p and the host accepts UVC. |
View all HDR / WDRcamera modules | ||
Key Specifications
Specification | Details |
Model | SF-C1013USB-9515-FF V1.0 |
Product Name | OV10633 720p WDR USB Camera Module |
Image Sensor | OMNIVISION OV10633 CMOS Sensor |
Resolution | 1MP / 1280×720 |
Video Output | 1280×720 at 30FPS |
Sensor Size | 1/3-inch |
Pixel Size | 4.2×4.2 μm |
Feature | WDR |
Lighting Synchronization | Trigger Out / Strobe, output signal at exposure start |
Output Format | YUV, MJPEG |
Focus | Fixed Focus |
FOV | H85° |
EFL | 3.6mm |
F.NO | 2.0 |
Focusing Range | 60 cm to infinity |
Module Size | 95 × 15 mm |
Interface | USB 2.0, Trigger Out / Strobe output |
SincereFirst Customization
A closer visitor position
Send the closest standing distance and the width to include there. SincereFirst can assess a lens and focus arrangement for that zone, then compare face detail at both the near and usual positions.
A fixed panel opening
With a bezel section showing the window, board seat and cable exit, we can review lens alignment and mounting around the long PCB. The sample should show the full intended view through the installed window.
An existing lamp driver
Give us the driver’s trigger-input specification. We can compare it with the camera output and review the signal connection. Test that pairing at the required exposure before committing to the lighting board.
Final configuration should be validated with the actual host platform, enclosure, optics, software, and lighting environment before sampling.
FAQ
Can the strobe output supply power to the lamp?
Use the strobe pin as a timing signal and power the lamp through a compatible external driver. Confirm its trigger threshold against the camera’s output and check the light pulse with the intended exposure time.
Can my controller tell this camera when to capture through the strobe pin?
The documented pin sends timing out when camera exposure starts. A controller that must initiate capture needs a camera with a verified trigger input. Check the signal direction before designing the control board.
Will a wider lens keep a visitor sharp closer than 60 cm?
A wider view changes how much of the visitor fits in the frame. The standard focus range starts at 60 cm, so a shorter working distance calls for a lens and focus assessment at that position.
Send an Inquiry About Your OV10633 Installation
Use Send Inquiry and start with your available panel space, working distance or light-driver specification. SincereFirst can check the lens fit or review the driver’s compatibility with the strobe output.
Send Inquiry
- 4K Camera Module (42)
- 4K FPC Camera Module (17)
- 4K USB Camera Module (22)
- 8K Camera Module (28)
- AA Camera Module (8)
- Camera Module Connectors (1)
- Endoscope Camera Module (11)
- ESP32 Camera Module (8)
- External Trigger Camera Module (9)
- FPC Camera Module (55)
- DVP Camera Module (10)
- MIPI Camera Module (44)
- Global Shutter Camera Module (11)
- HDR / WDR Camera Module (1)
- High Frame Rate USB Camera Module (13)
- Medical imaging module (3)
- Raspberry Pi Camera Module (6)
- Thermal Imaging Camera Module (3)
- USB Camera Module (71)
- USB2.0 Camera Module (53)
- USB3.0 Camera Module (17)
- UVC Camera Module (18)
- 1MP Camera Module
- 2MP Camera Module
- 2MP USB Camera Module
- 4K Camera Module
- 4K Endoscope Camera Module
- 5MP Camera Module
- 8MP Camera Module
- 12MP Camera Module
- 24Pin BTB Connector
- 48MP Camera Module
- 50MP Camera Module
- 64MP Camera Module
- 1080p60 Camera Module
- AF Endoscope Camera Module
- AI Camera Module
- Auto Focus Camera Module
- Autofocus Camera Module
- Cmos Camera Module
- DVP Camera Module
- Embedded Camera Module
- Endoscope Camera Module
- ESP32 Camera Module
- External Trigger Camera Module
- Fixed Focus Camera Module
- FPC Camera Module
- Global Shutter Camera Module
- HDR Camera Module
- High Frame Rate USB Camera Module
- IMX415 Camera Module
- IMX766 Camera Module
- Industrial Camera Module
- Mini USB Camera Module
- MIPI Camera Module
- OEM Camera Module
- OV64B40 Camera Module
- OV5640 Camera Module
- PDAF camera module
- Raspberry Pi Camera Module
- UHD Camera Module
- USB2.0 Camera Module
- USB3.0 Camera Module
- USB Camera Module
- USB Endoscope Camera Module
- UVC Camera Module
- Wide Angle Camera Module
Related Products
slim IMX415 4K USB camera module with D86° coverage, less than 0.3% distortion, 1080P@60FPS and Fixed-Focus or Autofocus options.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
S5KGM1 48MP autofocus Type-C USB2.0 camera module with 8000×6000 capture, 4K30 video, HDR and dual-layer PCB design for compact high-resolution imaging devices.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
USB 2.0 camera module with 1/3.75-inch CMOS sensor, up to 1280 × 960 resolution at 30fps MJPG, MJPG/YUY2 output, 30 × 25mm PCB and optional 150° / 75° / 62° lens configurations.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
IMX766 50MP autofocus Type-C USB2.0 camera module with 8160×6120 resolution, 4-in-1 pixel, PDAF, HDR and dual-layer PCB design for high-detail embedded imaging.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
IMX415 USB 2.0 UVC camera module with autofocus, H129° coverage and 4K video output for wide-angle imaging devices.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
USB camera module with H.264, MJPEG and YUV output, 20 × 20mm PCB, M12 lens mount and 5Pin connector.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
IMX415 USB 2.0 UVC camera module with Fixed Focus , H129° coverage and 4K video output for wide-angle imaging devices.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
2MP USB2.0 UVC camera module with external trigger and 1080P MJPG up to 60fps for controlled image capture, OEM equipment integration and customizable optics.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
1MP USB 2.0 camera module with 1/4-inch sensor, integrated microphone, UVC/UAC output, Fixed Focus from 60cm to infinity, D67° FOV, F2.8 lens, 20 × 20mm PCB and 4Pin 0.8mm-pitch connector.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
0.3MP USB camera module with GC0328 sensor, Fixed Focus, 640 × 480 resolution at 25fps, D150° × H120° × V86° ultra-wide FOV, F2.4 lens and 4Pin 1.25mm connector.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
5MP FPGA global shutter camera module with external trigger support, customized lens options and USB2.0 interface for synchronized imaging and embedded vision applications.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.
OG02B10 2MP 60FPS Global Shutter USB2.0 camera module with external trigger, OG02B10 color sensor and optional monochrome configuration for synchronized motion imaging and compact equipment integration.
—————————————————————————————–
Price is for reference only. Please contact us for the latest quotation.















